MULTIFUNCTIONAL SOLVENT
CLEANING AGENT, DECONTAMINATION AGENT
THINNER, SOLVENT
 |
Analys report available on request 21/026529 LC GC-FID DIN/EN 16995 |
|
 |
 |
.jpg)
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Appearance |
Visual |
Clear fluid |
- |
|
Colour |
Visual |
Colourless |
- |
|
Odour |
Olfactory |
Mild, non-persistent |
- |
|
Density at 25°C |
NF EN ISO 12185 |
916 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.4010 |
- |
|
Freezing point |
ISO 3016 |
-95 |
°C |
|
Solubility in water |
- |
100 |
% |
|
Kinematic viscosity at 25°C |
NF EN 3104 |
1.7 |
mm²/s |
|
Acid value |
EN 14104 |
0 |
mg(KOH)/g |
|
Iodine value |
NF EN 14111 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
< 0.01 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
% |
|
Vapour pressure at 20°C |
NF EN 13016-1 |
11.5 |
hPa |
|
PERFORMANCE CHARACTERISTICS |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
KB index |
ASTM D 1133 |
> 150 |
- |
|
Evaporation rate |
internal |
9 |
minute |
|
Surface tension at 20°C |
ISO 6295 |
27.7 |
Dynes/cm |
|
Breakdown voltage |
IEC 156 |
nm |
Volts |
|
Copper blade corrosion 100h at 40°C |
ISO 2160 |
1a |
Rating |
|
FIRE SAFETY PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Flash point (vacuum) |
ISO 2719 |
35 |
°C |
|
Self-ignition point |
ASTM E 659 |
280 |
°C |
|
Lower explosive limit |
NF EN 1839 |
1.5 |
% (by volume) |
|
Upper explosive limit |
NF EN 1839 |
13.7 |
% (by volume) |
|
TOXICOLOGICAL PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
CMR, irritating and corrosive substance content |
CLP Regulation |
0 |
% |
|
ENVIRONMENTAL PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Biodegradability |
OCDE 301 A OECD 301 C (MITI) |
> 70 > 70 |
% % |
|
Octanol/water partition coefficient |
ISO 8692 |
-0.49 |
Log.P |
|
Sulphur content |
GC-MS |
0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
% |
|
Total halogen content |
GC-MS |
0 |
% |
|
Chlorinated solvent content |
- |
0 |
|
|
Aromatic solvent content |
- |
0 |
|
|
Environmentally hazardous substances content |
CLP Regulation |
0 |
% |
|
Content of compounds with a GWP |
- |
0 |
% |
|
Content of compounds with an ODP |
- |
0 |
% |
APPLICATIONS
Cleaning agent substitute for ethyl alcohol (ethanol) and isopropanol (IPA)
Surface preparation before gluing, coating or printing
Thinner for adjusting the viscosity of paints
Cleaning agent for varnishes, inks, solvent-based or water-soluble, non-crosslinked paints
Solvent for cellulose resins, Plastisols, vegetable resins, rosin
Can be used as antifreeze, pure freezing point -95°C
Evaporation rate booster for conventional solvents
Removing labels
USES
NEUTRALÈNE SL 30 can be used pure or diluted with water,
with a cloth or brush,
in fountains, by immersion, with or without agitation,
low-pressure spraying,
in ultrasonic tanks only if diluted in water.
PRESENTATIONS
|
Drum 200 L
|
Can 20 L
|
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 